| Subscribe for news
Jul
27th

Duty of Care in the Built Environment

Asbestos & Hazardous Materials | Indoor Air Quality | Mould | Water Quality | Slip Resistance Testing | Aluminium Composite Panel Sampling

By Joe Scholz, Director

Occupational Health and Safety Legislation in Australia burdens a Person Conducting Business or Undertaking (PCBU) with the primary duty of care to ensure a safe workplace at all times, including exposure to environmental contaminants.

A building is a workplace for its occupants, visitors and also for maintenance contractors.

Environmental testing is the best avenue, legally speaking, for Commercial Buildings of one form or another, to evidence that its PCBU has taken steps to make a workplace safe from environmental risks.

When managing a commercial building, the PCBU is almost always the Building Manager acting on behalf of the Building Owner.

When engaging a contractor or consultant to undertake environmental testing or inspections, two factors vastly improve the risk profile of a Building Manager and Building Owner;

  • independent assurance of the contractor’s quality management system
  • appropriate insurance cover held by the contractor.

This article explains what a Building Manager should look for in a testing contractor or consultant in relation to these two factors.

If you’d like more information about your duty of care, occupational health and safety legislation, or the specific regulations and guidelines covering environmental risks in the built environment please contact us.

Quality Assurance Testing, Assessment and Reporting

Quality assurance for environmental testing is essential for Building Managers and Owners to;

  • Comply with legislation, standards, and Codes of Practice
  • Provide a traceable record for the whole process of the Inspection, Sampling, Laboratory Testing, Result Analysis and Reporting
  • Provide consistent results independent of the individual conducting the testing
  • Provide reliable documentation for use in litigation mitigation

Quality Assurance in environmental testing is complex and not easily understood by Building Managers and Owners.  Third party accreditation provides assurance the tester has been independently assessed for the inspection and assessment.

 

ISO 17020 (2012) is an International Standard that specifies Quality Assurance for inspection.

ISO 17025 (2017) is an International Standard that specifies Quality Assurance for laboratories.

 

NATA provides third party accreditation for compliance with ISO 17020 & 17025 in Australia.  Companies may only be accredited for specific activities and environments. For example:

  • sampling potable water for lead analysis in a commercial building,
  • developing an Asbestos Register for a commercial building,
  • assessing the indoor air quality in a commercial building,

As such, to provide independently verified quality assurance for environmental testing, a Building Manager should commission a company with NATA accreditation for the specific testing or inspection required.  The whole process must be considered from end to end, as shown in the following infographic.

Quality Assurance Summary of the Environmental Testing Process

Common scams occur when firms promote themselves as NATA accredited for a test or inspection when they;

  • only have their equipment calibrated by a NATA accredited supplier, or
  • only send their samples to a NATA accredited laboratory, or
  • do indeed have NATA accreditation, but it’s for a completely unrelated testing or inspection task.

How to assess NATA accreditation for an Environmental Testing Activity

  • Check NATA website: https://www.nata.com.au/accredited-facility
  • Search for the Business Name and review the accreditations
  • ISO/IEC 17020 (2012) must be shown & the specific testing activity shown under
    ‘SERVICE’ ‘PRODUCT’ or ‘DETERMINANT’ columns

Litigation and Insurance

Thankfully litigation is not an everyday occurrence, but if it were to occur, shifting exposure from the Building’s insurance to the testing contractor’s insurance is the main downside protection for Building Owners and Building Managers.

Due to the varied nature of environmental testing, assessment and reporting, ensuring valid and appropriate insurance for the activities undertaken can be difficult.  The two insurances of concern are:

1. Public and Products Liability


This insurance deals with personal injury or property damage that may be caused by the contractor or consultant conducting works onsite.  Environmental testing activities are highly varied and thus the potential liability can only be insured if the testing activity is specifically covered, usually indicated by being listed on the insurance certificate of currency.
 

2. Professional Indemnity


This insurance deals with advice provided by the contractor or consultant which includes:

  • Determining sampling locations
  • Determining the scope of the tests (what to test for?)
  • Assessing the results
  • Reporting
  • Recommendations

Even more importantly than above, environmental testing activities are highly varied and thus the professional indemnity is only available for the specific testing activities that the contractor of consultant has obtained cover for, usually indicated on the insurance certificate of currency.

NOTE: Cover for liabilities arising from asbestos is excluded from ALL professional indemnity insurance policies, UNLESS the policy includes a so called asbestos endorsement which negates aspects of the blanket exclusion so that the insured’s asbestos related activities are covered.
 


Recent Posts

The Impact of Indoor Environment Quality on Cognitive Function

13th Dec

As we head into 2022, a year marked by the great migration back to the office environment, there is much focus on indoor air quality. But ho...

COVID-19 Ventilation Optimisation: Guidelines for Australian Schools

07th Dec

Comprehensive guidelines for schools in Australia to mitigate the risk of transmitting COVID-19 through ventilation systems....

Ventilation in Schools, Kindergartens and Early Childcare Centres

13th Sep

Victorian authorities are reported to be considering ventilation monitors in schools....

View All
QED FEATURED ARTICLES

How IEQ Impacts Employee Productivity

We believe tenants should engage with landlords on the indoor environment quality with the same level of importance at which they consider the energy consumption of a building – it will improve their bottom line faster!

White Papers

December 13th 2021

The Impact of Indoor Environment Quality on Cognitive Function

As we head into 2022, a year marked by the great migrat...

September 07th 2021

Using Ventilation to Reduce the Covid-19 Infections within Hospitals

Using Ventilation to Reduce the Covid-19 Infections wit...

April 06th 2020

COVID-19 Cleaning & Cleaning efficacy

A simple guide on what you need to know about cleaning ...

View More

Latest News

December 07th 2021

COVID-19 Ventilation Optimisation: Guidelines for Australian Schools

Comprehensive guidelines for schools in Australia to mi...

September 13th 2021

Ventilation in Schools, Kindergartens and Early Childcare Centres

Victorian authorities are reported to be considering ve...

August 10th 2021

Sampling for cytotoxic drugs contamination in healthcare facilities

Our team recently conducted sampling for cytotoxic resi...

View More

Need more information? We’re here to help you...

Get in touch